1. Begin by plugging in the Work Sharp Ken Onion Knife Sharpener and flipping the power switch to ‘ON’.
2. Adjust the angle guide to match the edge angle of your knife, then select a sharpening belt that is appropriate for your level of sharpness desired (coarse, medium, or fine).
3. Place the blade into either slot on the sharpener at an even pressure so it does not tip up or down when pulled through per instructions from the manual. Make sure you keep your fingers away from moving parts while operating the machine!
4. Turn on the motor and pull the blade through slots with uniform back-and-forth movements until the desired level of sharpness is achieved; this will take multiple passes depending on the type and condition of the blade.
5. Once finished, turn off the motor and unplug the unit before removing the knife; use caution as the blades may still be very sharp!
6. Wipe clean any metal shavings left behind with a cloth dampened with light oil such as WD40 or vegetable oil – do not use water!
- Step 1: Prepare the machine
- Ensure that the power cable is plugged in and that the sharpener’s belt tension knob is at its lowest setting.
- Step 2: Place knife blade against coarse abrasive belt
- Hold the handle of the knife with one hand and grasp the top of the Work Sharp Ken Onion Knife Sharpener with the other hand.
- Push forward to make contact between the blade edge and belt surface (the blade should be facing away from you).
- Step 3: Pull back on the handle while keeping downward pressure on the cutting edges
- Dragging your knife across the belt will create a burr along both sides of the blade, indicating successful sharpening.
- Step 4: Remove the burr by running the knife through a medium grit belt in the same manner as step 3, but less pressure needs to be applied when using this medium grit belt than was used for the first stage sharpening process
- Once the burr has been removed, repeat step three using fine-grit abrasive belts until desired level of sharpness is achieved or recommended number of passes have been completed according to the manufacturer’s instructions for your specific model/type of steel used in the construction of blades being sharpened.
How Do You Sharpen a Knife With a Ken Onion Sharpener?
Sharpening a knife with a Ken Onion sharpener is an easy task. First, secure the sharpener onto a flat surface and ensure it won’t slide around or move as you use it.
Next, place the knife blade in the appropriate slot for your desired angle – this should be at roughly 15-20 degrees per side for most kitchen knives (check your manual if unsure).
Finally, begin to draw the blade along the length of both slots from heel to tip several times on each side until you have achieved your desired edge.
Be sure to switch sides regularly when sharpening so that both edges are evenly worked. Once finished, check for any burrs or rough spots and repeat until satisfied with the results.
Always remember to clean off any metal dust or particles before removing your knife from its holder – failure to do so can result in rusting down the line!
How Do You Use Worksharp?
Worksharp is an incredibly versatile tool that can be used for a variety of sharpening tasks. It is designed to keep your knives and tools razor-sharp much easier and more consistent than ever before.
To use it, attach your knife or tool to one of the included angle guides (or other available accessories) and then lower it onto the abrasive belt.
Adjust the angle guide to achieve the desired amount of honing on each side, then start running your blade along the belt at a steady pace until you achieve a sharp edge. Once you have done this for both sides, you can switch out grits as needed in order to fine tune your edge even further if desired.
With Worksharp’s adjustable speed settings, variable angles, and wide range of grits available, you can hone any blade with incredible precision every time quickly!
What are the Settings for Ken Onion Work Sharp?
The Ken Onion Work Sharp knife sharpener is a great tool for cooks who want to keep their knives in top condition. It comes with three different settings, so you can adjust it depending on the blade type and how dull it is.
The first setting, “Set” is designed for general maintenance and lets you slowly hone your blades without taking them apart or using abrasives.
This setting will also help restore edges damaged or dulled over time. The second setting, “Sharpening,” is used when your blade needs more than just maintenance and requires honing and polishing the edge to regain its original sharpness.
Finally, the third setting, “Polish” provides a fine touch-up finish after using either Set or Sharpen mode; this setting takes care of any burrs created during honing/sharpening and provides an extra fine finish for those who want their knives looking new again!
With these three simple settings available on the Ken Onion Work Sharp knife sharpener, you’ll be able to quickly restore your favorite cooking tools without any hassle whatsoever!
How Does the Any Sharp Knife Sharpener Work?
The AnySharp Knife Sharpener is a revolutionary tool designed to make sharpening knives easier and more effective than ever before. Its patented suction-cup base attaches firmly to any flat, non-porous surface for stability while you sharpen your knife.
To use it, insert the blade into the V-shaped slot at one end of the sharpener and pull back gently but firmly in an arc motion as if you were sawing through the wood – this helps create a precise angle that’s ideal for re-sharpening blades.
The other end of the device contains ultrafine abrasives, which act like tiny sandpaper strips to restore the edge quickly and efficiently with minimal effort on your part.
This process can be repeated several times until you have achieved a razor-sharp edge that lasts much longer than traditional methods. Additionally, since no oil or water is necessary when sharpening with this tool, clean-up is quick and easy too!
Work Sharp Ken Onion Edition – Instructional Video
Ken Onion Work Sharp Guide
Ken Onion Work Sharp Guide is a revolutionary sharpening system that helps you quickly and easily sharpen all kinds of knives, from kitchen cutlery to pocket knives.
It features an adjustable angle guide for consistent results and variable speed control and airflow optimization technology for precision honing. With its convenient portability and intuitive design, the Ken Onion Work Sharp Guide makes it easy to keep your blades in top condition at home or on the go.
Work Sharp Ken Onion Edition Knife And Tool Sharpener
The Work Sharp Ken Onion Edition Knife and Tool Sharpener provides a powerful, precise sharpening solution for any blade or tool. It uses flexible abrasive belts to easily sharpen knives or tools with precision control from 15° to 30° angles.
This sharpener is easy to use, fast, and effective at restoring the edge of your favorite blades, no matter their shape.
With its variable speed motor and adjustable angle guide, you can get an exacting edge every time quickly and efficiently!
Ken Onion Work Sharp Review
The Ken Onion Work Sharp is a sharpening system that offers professional-level results in the comfort of your own home. It features an adjustable speed control and variable angle sharpening guides, allowing you to sharpen any knife easily.
The diamond abrasive belts provide precise and repeatable edge angles, while the ceramic honing rods help maintain those edges over time.
With its intuitive design and user-friendly interface, this system has earned glowing reviews from users all across the globe who have been able to get razor-sharp blades in no time!
Best Belts for Ken Onion Work Sharp
Ken Onion’s Work Sharp knives are renowned for their quality and performance, so it stands to reason that you’d want to pair them with the best belt possible. The Ken Onion Edition belts from Work Sharp are explicitly designed for blade sharpening and provide superior precision, durability, and accuracy.
These belts feature a silicon carbide abrasive material that delivers exceptional sharpening results while lasting longer than traditional abrasives.
In addition, they come in multiple sizes ranging from extra-fine to coarse grits – giving you plenty of options when it comes time to sharpen your knife blades.
Ken Onion Work Sharp Attachments
The Ken Onion Work Sharp Attachments are a great way to add even more functionality and convenience to your sharpening system. These attachments allow you to hone chisels, plane blades, knives, scissors, and other tools precisely and accurately, making them much easier to work with.
The adjustable angle guide ensures that the right amount of pressure is applied when honing so that each tool is razor-sharp after use.
With the Ken Onion Work Sharp Attachments, you can easily sharpen any blade in no time at all!
Ken Onion Work Sharp Belts
The Ken Onion Work Sharp Belts are designed to provide reliable and consistent sharpening results for knives, tools, and other blades. These belts are made from superior abrasive materials that offer a long-lasting sharpening experience with minimal effort.
The variable speed motor allows you to adjust the speed of the strap according to your needs, providing precision control over the ground level for each blade.
Additionally, these belts feature an adjustable angle guide, which makes achieving optimal angles easier than ever before. With their high-quality construction and easy-to-use design, it’s no wonder why so many people rely on Ken Onion Work Sharp Belts for all their sharpening needs.
Work Sharp Ken Onion near Me
If you’re looking for a great way to sharpen your blades, then the Work Sharp Ken Onion Sharpener is ideal. This professional-grade sharpener can be found at many local retailers near you and online, so finding one should not be too difficult.
It’s incredibly easy to use, and with it, you’ll be able to sharpen knives of any size in just minutes quickly!
Plus, it comes with several accessories that make sharpening even easier.
Ken Onion Knives
Ken Onion knives are popular with professional chefs and home cooks alike. These Japanese-style knives feature a unique blade shape that provides superior slicing performance. The blades are made from high-quality stainless steel, making them extremely durable and rust-resistant.
The ergonomic handle design ensures maximum comfort while using the knife, allowing users to work with precision and accuracy. With their sleek look and excellent cutting ability, Ken Onion knives will help you prepare meals like a pro!
Conclusion
In conclusion, the Work Sharp Ken Onion Knife Sharpener is an efficient and effective way to keep your knives sharp. With its adjustable angle guide and variable speed motor, you can sharpen any knife with ease.
The easy-to-use design makes it simple for anyone to learn how to use this device quickly and easily.
Whether you’re a professional chef or just someone who loves cooking at home, the Work Sharp Ken Onion Knife Sharpener is worth considering when looking for ways to keep your knives in top condition.