The most likely reason your Kershaw pocket knife won’t tighten is that the blade is not properly aligned with the handle. To fix this, first make sure the blade is fully extended. Then, holding the knife by the handle, use your other hand to push on the back of the blade until it snaps into place.
If this doesn’t work, your knife may need to be sent in for repairs.
If your Kershaw pocket knife won’t tighten, there are a few things you can do to fix it. First, make sure the blade is fully extended. If it’s not, extend it and try tightening again.
If that doesn’t work, try loosening the screw that holds the blade in place. Once loose, you should be able to tighten the blade without any issues. If neither of these methods work, then your knife may need to be sent in for repair or replaced entirely.
Kershaw Knives
Kershaw Knives are a brand of high-quality knives that are popular among knife enthusiasts and collectors. The company was founded in 1974 by Kai USA Ltd., and is currently headquartered in Tualatin, Oregon. Kershaw offers a wide variety of knives, including pocket knives, hunting knives, kitchen knives, and tactical knives.
The company also produces a line of sharpeners and sheaths. Kai USA Ltd., the parent company of Kershaw Knives, also owns Shun Cutlery and Zero Tolerance Knives. Shun is a Japanese knife company that specializes in creating premium kitchen cutlery.
Zero Tolerance Knives is a subsidiary of Kai USA Ltd. that focuses on making high-performance tactical folding knives for military, law enforcement, and civilian use.
Kershaw Torsion Bar Replacement
If you’re the owner of a Kershaw knife, you know that they’re built to last. But like any tool, they will eventually need some maintenance. One common repair is replacing the torsion bar.
The torsion bar is what allows the blade to open and close smoothly. Over time, it can become worn down and needs to be replaced. Luckily, this is a relatively easy repair that you can do at home with just a few tools.
To start, you’ll need to remove the old torsion bar. This is usually done by unscrewing the retaining screws that hold it in place. Once these are removed, the old torsion bar can simply be pulled out.
Next, take your new torsion bar and insert it into the knife handle. Make sure that it’s seated properly and then replace the retaining screws. Be careful not to overtighten them – just snug them up until they’re flush with the surface of the handle.
Once everything is back together, test out your knife to make sure the blade opens and closes smoothly. If all goes well, you’ve successfully replaced your Kershaw’s torsion bar!
Kershaw Safety Tip Lock Set
If you own a Kershaw knife with a locking mechanism, it’s important to know how to properly use the lock. Here is a safety tip from Kershaw: To engage the lock, simply push the blade lock up into the locked position.
To disengage the lock, pull down on the blade lock while simultaneously pushing on the release tab (located just above where the blade meets the handle scales).
Kershaw Leek Torsion Bar Replacement
The Kershaw Leek is a popular EDC (every day carry) knife. It’s thin, light and has a great assisted opening mechanism. The torsion bar is what makes the assisted opening possible and it’s also what can fail on the Leek over time.
In this blog post, we’ll show you how to replace the torsion bar on your Kershaw Leek so you can keep carrying it everyday. The first thing you need to do is remove the screws from the back of the handle using a Phillips head screwdriver. Once those are removed, you can carefully pop off the back plate.
Be careful not to lose any of the small parts like washers or springs that may fall out when you do this. With the back plate removed, you should now be able to see the torsion bar inside the handle. It will be held in place by two small pins.
Use a punch or another small tool to drive out these pins and release the torsion bar. Now simply reverse these steps to install the new torsion bar. Put the backplate back on and secure it with screws, making sure not to overtighten them as this could strip out the soft aluminum threads in the handle.
Test your new torsion bar by flicking open and closed a few times before putting everything away.
Kershaw Leek Spring Replacement
If you have a Kershaw Leek with a broken spring, don’t despair! You can easily replace the spring with a few simple tools. First, remove the pocket clip from the knife.
Next, use a small screwdriver to remove the screws that hold the handle scales in place. Be careful not to lose the tiny washers that sit under the screws! Once the handle scales are off, you’ll be able to see the broken spring.
Simply remove it and replace it with a new one. You may need to use needle-nose pliers to help align everything correctly before inserting the new screw. Screw everything back together tightly and reattach your pocket clip and you’re good to go!
Your Kershaw Leek will be as good as new, ready for another hundred thousand cuts.
Kershaw Leek Thumb Stud
Assuming you would like a blog post discussing the Kershaw Leek Thumb Stud: The Kershaw Leek is a fantastic knife for everyday carry. It’s small and lightweight, yet still manages to pack a punch with its 3-inch blade.
One of my favorite features of the Leek is the thumb stud that allows for easy one-handed opening. The thumb stud is placed in just the right spot so that it’s easy to reach when you need to open the knife quickly. I also appreciate that the blade is made of high-quality steel, which means it will hold up well over time.
Whether you’re using it for basic tasks around the house or more serious outdoor adventures, the Kershaw Leek is sure to become your go-to knife.
How to Clean Kershaw Knife
If you’re like most people, you probably don’t think too much about how to clean your Kershaw knife. After all, it’s just a knife, right? Wrong.
Just like any other tool, your Kershaw knife needs to be properly cared for if you want it to last. Here are some tips on how to clean your Kershaw knife so that it will serve you well for years to come. First and foremost, always make sure that the blade is clean before putting it away.
A quick wipe down with a damp cloth should do the trick. If the blade is particularly dirty or caked with food residue, you may need to give it a more thorough cleaning with soap and water. Be careful not to let the blade soak in water for too long, as this can damage the steel.
Dry the blade thoroughly before storing it away. Next, take a look at the handle of your Kershaw knife. If it’s made of wood, make sure that there are no cracks or splits in the wood where dirt and bacteria could accumulate.
If necessary, lightly sand down the handle and then apply a thin layer of mineral oil to protect the wood from moisture damage. For handles made of other materials such as plastic or aluminum, simply wipe them down with a damp cloth followed by a dry one to remove any dirt or fingerprints. Finally, take a look at your knife’s sheath (if it has one).
The sheath is designed to protect both you and your knife while in storage or transport, so it’s important that it stays clean as well! Simply wiping down the outside of the sheath with a damp cloth should suffice; however, if there is any dirt or grime buildup inside of the sheath (this can happen if you store yourknife in its sheath while wet), then you’ll need to wash it out with soap and water.
Does Kershaw Have a Lifetime Warranty?
No, Kershaw does not have a lifetime warranty. However, they do offer a limited warranty for the original owner of the knife against defects in materials and workmanship. The warranty does not cover normal wear and tear, damage caused by misuse, disassembly, or alterations.
If your knife needs repair or replacement due to a manufacturing defect, please contact Kershaw customer service at customerservice@kershawknives.com or (800) 887-6268.
Are Kershaw Pocket Knives Any Good?
Kershaw is a well-known and respected manufacturer of knives, so it’s no surprise that their pocket knives are also excellent quality. Kershaw pocket knives are made with high-quality materials and construction, and they offer a great selection of designs to choose from. Whether you’re looking for a simple everyday carry knife or a more specialized tool, Kershaw has a pocket knife that will suit your needs.
Will Kershaw Replace Blade?
No, Kershaw will not replace blade. Kershaw is a well-known and respected company that produces high quality knives. The company has been in business for over 100 years and has earned a reputation for producing durable, reliable knives.
Are Kershaw Knives High Quality?
Kershaw Knives are high quality knives made with excellent craftsmanship. The company has been making knives since 1974 and is known for their durable, well-made products. Their knives are used by both amateur and professional chefs alike, and have a reputation for being some of the best in the business.
Kershaw offers a wide variety of knife styles to suit any need, and their blades are made from high-quality materials like stainless steel and carbon fiber. Whether you’re looking for a simple kitchen knife or a more specialized tool for hunting or camping, Kershaw has a blade that will fit your needs.
How to Maintain Your Kershaw Knife
Conclusion
The Kershaw pocket knife is a great product for those who are looking for a durable and reliable knife. However, some users have reported that the blade does not stay tight in the handle and may come loose over time. While this is not a deal-breaker for most users, it is something to keep in mind when considering this knife.